What You're Actually Looking At
This is a pair of angled mounting arms for flat rubber or poly mud flaps — steel, black powder or paint finish, bent at 45 degrees so the flap sits back off the tire instead of hanging straight down. Bolt spacing is 1-1/8" center to center, which is a common heavy-truck spec for trailer and straight-truck flap brackets.
The FITS data on this listing says Mazda 3 2004-2005, and we're not going to pretend that makes sense — this hardware doesn't belong on a passenger car. If you came here off a Mazda search, you're probably in the wrong aisle. This part is built for commercial trailer and truck mudflap setups, full stop.
If you're a fleet guy replacing hangers on a trailer or straight truck, this is straightforward stock hardware — check your old bracket's bolt spacing and arm length before you order.
How the Cross Numbers Line Up
033-04528 cross-references to Fortunes MFHA20B and Pino Metal Products PN-3-C-002-BK, plus OE number FD007. These are all steel angled hanger arms built to the same rough spec — 28" length, 45 degree bend, 1-1/8" bolt pattern — which is why they interchange in the aftermarket.
Where these can differ is arm gauge (thickness), finish (raw black vs. galvanized), and exact hole placement on the mounting tab. If your old hanger has extra holes or a different tab shape, don't assume a straight swap — measure it against the old part before you bolt anything up.
Bottom line: pull your old hanger off, measure bolt spacing and overall length, and match it against the number stamped or listed on your unit. If nothing's stamped, bring it in or send us a photo with a tape measure in the shot.
Ordering From PartStop
We're in Tacoma, so if you're local and need these today, call ahead and we'll have the pair pulled and ready — no waiting on freight for basic hardware like this.
Ship nationwide too, and these are light enough that shipping doesn't kill you on cost. Comes with our standard 6+ month warranty on the part.
Confirm the fitment by VIN or by the number off your old hanger before you order — we'd rather spend two minutes on the phone confirming than have you sending a return back to Tacoma.
033-04528 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to 033-04528. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| OE | FD007 |
| Fortunes | MFHA20B |
| Pino Metal Products | PN-3-C-002-BK |
Frequently asked questions
Does 033-04528 fit my Mazda 3?
No — despite what the fitment field says, this is heavy-duty steel mud flap hanger hardware built for trailers and straight trucks, not passenger cars. If you're working on a Mazda 3, this isn't your part.
Is this the same as the Fortunes MFHA20B?
They cross-reference and share the same basic spec — 28", 45 degree bend, 1-1/8" bolt spacing — but gauge and finish can vary slightly between brands. Compare against your old hanger's measurements before ordering to be sure.
How do I know if the bolt spacing on my truck matches this one?
Pull the old hanger and measure center-to-center on the mounting holes with a tape measure. If it's 1-1/8" and the arm length is close to 28", you're in the right ballpark — if it's off, don't force it.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.