What You're Actually Buying
This is a straight-style hanger, 28 inches long, built for heavy-duty applications where the standard light bracket bends or cracks within a season. Black finish, 1-1/8" bolt spacing on the mounting holes — that spacing is the number that matters, not the brand name stamped on the old one.
It mounts behind the rear tires or on trailer mud flap brackets where you need a straight arm instead of a swing or spring-loaded style. Fits a wide range of trailers and straight trucks that use this bolt pattern, but 'fits a wide range' doesn't mean it fits yours automatically — measure before you order.
Why These Numbers Cross
033-04128 cross-references to OE 649BSL and Pino Metal Products PN-3-C-007-BK because all three share the same length, bolt spacing, and hanger geometry. Different manufacturers stamp their own part numbers on essentially the same bracket design — that's normal in this category, not a red flag.
Where guys get burned is bolt spacing and arm length. A 1-1/8" spacing bracket won't line up on a frame drilled for 1-1/4" or wider. Same goes for length — a 28" straight arm sitting next to a 24" bracket looks similar until you try to bolt it up. Pull the old hanger, measure hole-to-hole, and measure the arm before you call us or place an order.
Buying It From Us
We keep these in stock in Tacoma for same-day pickup or counter will-call, and we ship nationwide if you're not local. At $129.99 it's not a cheap swap, so we'd rather you confirm fitment first than send it back.
Every hanger we sell carries our 6+ month warranty — if it cracks or the mount fails under normal use, bring it back or call us and we'll sort it. Give us your VIN or trailer spec, or better yet the number off the old bracket, and we'll confirm before it leaves the shelf.
033-04128 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to 033-04128. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| OE | 649BSL |
| Pino Metal Products | PN-3-C-007-BK |
Frequently asked questions
Does 033-04128 fit my flatbed trailer?
Depends on your bolt spacing and hanger length, not just the trailer type. If your mounting holes are 1-1/8" apart and you need a 28" straight arm, it'll likely work — but give us the VIN or the trailer's mud flap spec and we'll verify before you order.
Is this the same as the OE 649BSL bracket?
Same length, same bolt spacing, same straight-hanger design — it crosses over. It's not a stamped duplicate of that exact part, it's an aftermarket equivalent built to the same spec. Confirm your old bracket's numbers match up before swapping.
Why does the bolt spacing matter so much on these?
Because if the holes don't line up with your existing frame or bracket mount, you're drilling new holes or it doesn't go on at all. 1-1/8" spacing is common but not universal — measure the old one before you order, don't guess from memory.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.