74255-061

74255-061 Cross-Reference — A22- Wheel Hub Cover kit

A22-74255-061 is the front hub cover kit Freightliner and Volvo put on their aero-spec Cascadias and VNLs to smooth out airflow around the wheel end - if your old one's cracked, missing bolts, or some genius zip-tied it back together, this is the kit that replaces it.

What You're Actually Buying

This is the plastic/composite hub cover that bolts over the front wheel end on Freightliner Cascadias and Volvo VNL/VNR trucks running the aerodynamic wheel package - not a decorative chrome cap, an actual aero piece that's part of the fuel economy spec on these trucks. Comes as a kit: cover, mounting hardware, sometimes a gasket or seal ring depending on the year.

It mounts to the hub face using the wheel-end bolt pattern, so it's specific to the axle and hub setup Freightliner/Volvo used - this isn't a universal snap-on hubcap you buy off a rack at the truck stop.

Kit runs $104, which is normal for these - they're not cheap because they're not a generic stamped steel cover, they're molded to spec for that wheel-end assembly.

How the Cross Numbers Line Up

The 74255-061 is the Freightliner/Volvo part number, and it crosses to A22-74255-040 and the ABP-N31-7425537 because these are all the same aero hub cover produced across different supplier batches - FlowBelow made a lot of these aero components under contract, so you'll see their numbers mixed in with the Freightliner OE numbers depending on which catalog you're pulling from.

FRCA-1602-SET is the aftermarket kit number some suppliers use for this exact application - same physical part, different part number because it's packaged by a different distributor.

What actually matters here: hub bolt spacing and cover diameter have to match your wheel end. These covers were used across a few years of Cascadia/VNL production and there were minor running changes, so don't just match by truck year - pull the number off your old cover or check your build sheet before ordering.

Ordering From Us

We keep these in stock in Tacoma and most orders that come in before early afternoon go out same day - if you're a fleet running the I-5 corridor or anywhere in the Northwest, that matters when a truck's sitting.

We ship nationwide too if you're not local - just give us the VIN or the number stamped on your old cover before you order so we're not guessing. These wheel-end pieces are specific enough that a mismatch means a return, and nobody wants that hassle.

Comes with our standard 6+ month warranty. If it doesn't fit or something's off with the kit, call us - we'd rather sort it over the phone than have you stuck with a part that doesn't bolt up.

74255-061 Cross-Reference & Interchange Numbers

These manufacturer and aftermarket numbers commonly cross-reference to 74255-061. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.

Brand / LineCross-Reference Numbers
Cross-ReferenceA22-74255-061, FRCA-1602-SET, A22-74255-040
FlowBelow / Freightliner OEABP-N31-7425537, A22-74255-011

Frequently asked questions

Does 74255-061 fit my 2019 Freightliner Cascadia?

Probably, but 'probably' isn't good enough for a wheel-end part - Freightliner ran a few variations of this aero hub cover through Cascadia production. Pull the number off your existing cover or check the VIN against the build spec before you order. Takes two minutes and saves you a shipping label back to us.

Is this the same as the FlowBelow ABP-N31-7425537 version?

Physically yes, it's the same hub cover - FlowBelow supplied a chunk of these under contract for Freightliner/Volvo's aero package, so their part number and the OE number both point to the same piece. Cross-reference it against your old part's number if you're not sure which one you had.

Does the kit come with the mounting hardware or do I need to source that separately?

The kit includes the mounting hardware - bolts and typically a gasket/seal ring depending on the application year. You shouldn't need to hunt down extra pieces, but if your old cover had additional brackets or spacers that aren't in this kit, give us a call before you install.

Not sure it fits? We check before you pay.

Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.

More cross-reference guides

Need the part, not just the reading?

Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.

Shop the full parts catalog

Shop by truck make

Popular model pages