What This Cover Does
The corner bumper cover is the molded plastic end cap that wraps the outboard edge of the bumper on the passenger side. It closes the gap between the bumper face and the fender, hides the mounting hardware, and takes the first hit when the front corner catches something. It is a cosmetic and protective piece, not a structural bumper bar.
This one is plastic, right side, black finish, and bolts to the factory mounting points. No drilling, no trimming, no bracket fabrication. If the original piece came off with hand tools, this one goes on the same way. Pull the old cover first and confirm the hole pattern and the depth of the wrap before you order.
Failure is usually mechanical, not gradual. A cracked mounting tab is the most common complaint — the cover still hangs on but rattles at highway speed and flexes every time you close the hood. Second most common is impact damage to the outboard face. Once the tab is broken, adhesive repairs rarely last a season on a working truck.
Why 42862 Crosses Here
United Pacific 42862 shows up on the same searches as 82750590 because both numbers describe the same physical part: right-hand corner bumper cover, plastic, black, for the Volvo application listed above. One number is the manufacturer's catalog reference and the other is the aftermarket supplier's stock number. Different catalog, same shape in your hand.
When two numbers cross on a body panel, what actually matters is the mounting hole pattern, the wrap radius at the outboard corner, and the side. Corner covers are not symmetric — a left will not flip over and work on the right. Confirm you are holding a right-side piece before you compare anything else.
Cross-reference is a starting point, not a fitment guarantee. Volvo ran running changes on bumper and corner hardware, and a number that crosses on paper can still miss by a hole. Verify against your VIN or against the number cast or stamped on the back of the cover you are replacing.
Before You Order
Pull the old cover and look at the back side. Most have a molded or stamped number in the plastic. That number, plus your VIN, is what settles the question — not the catalog. If the old cover is in pieces, photograph the mounting bracket and count the holes and their spacing before it goes in the scrap bin.
Check the bumper bar itself while the corner is open. If the corner took enough of a hit to destroy the cover, the bar behind it may be bent or the mounting brackets pushed back. Bolting a new cover onto a tweaked bar gives you a visible gap and a piece that cracks again at the same tab.
82750590 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to 82750590. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| United Pacific | 42862 |
Frequently asked questions
Is United Pacific 42862 the same part as 82750590?
They cross to the same right-hand corner bumper cover for the Volvo application listed. One is the manufacturer catalog number, the other is a supplier stock number. Confirm the side and the mounting hole pattern against your old cover or your VIN before ordering — a paper cross is not a fitment promise.
Will a left-side corner cover work on the right?
No. Corner bumper covers are handed. The wrap radius and the mounting tabs mirror each other, so a left-hand piece will not line up on the passenger side even if the material and finish match. This part is right side only, marked R.
Can I repair a cracked mounting tab instead of replacing the cover?
You can, but it rarely holds on a working truck. The tab flexes every time the cover loads up at highway speed, and plastic weld or adhesive repairs tend to reopen at the same spot within a season. If the tab is gone, replace the cover.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.