What This Molding Does
The center bumper trim molding is a chrome-finished ABS strip that mounts to the center section of the VNL front bumper on the driver's side. It is cosmetic and protective. It covers the bumper seam and mounting hardware, and it takes the first hit from road spray, salt, and stone chips before they reach the painted steel underneath.
This is the L-side piece. The right-hand molding is a separate part with its own number, and the two are not interchangeable — the contour mirrors across the centerline. Before you order, stand in front of the truck and confirm which side you are replacing. Driver's side is left.
Construction is ABS with a chrome finish. The resin is UV-stabilized so the gloss holds up through summer sun and winter salt, and the plating is specified to resist pitting and peeling rather than flaking off in sheets the way thin decorative chrome does after a couple of seasons.
Why These Numbers Cross
82758380 is the headline number most shops have written on the work order or read off the back of the old molding. GS-V-079-2 is the aftermarket cross-reference for the same left-hand center trim piece. Different catalog systems, same physical part: same side, same length, same mounting hole pattern, same bumper section.
Cross-references exist because the truck maker, the body shop system, and the aftermarket supplier each assign their own identifier to a component that only has to do one job — bolt to the same holes and follow the same contour. When the geometry and the mounting points match, the numbers cross.
Treat that as a starting point, not a guarantee. PartStop is an independent aftermarket seller and is not affiliated with, endorsed by, or authorized by any OEM. Other manufacturers' numbers appear here for identification only. Confirm fit against your VIN or against the number molded or stamped on the piece you are pulling off.
Check Before You Order
Pull the old molding first if you can. The number is usually on the back face. If the piece is shattered or already missing, run the VIN through a parts lookup to confirm which center trim configuration your VNL was built with — bumper trim varies by build within the 2018-2024 range depending on how the truck was specced.
Inspect the mounting points on the bumper while the trim is off. Clips and studs get pulled through when a molding is torn away in an impact, and a new strip will not sit flush on damaged mounting bosses. Mounting points on this part are pre-drilled to line up with the factory holes, so no re-drilling should be needed if the bumper itself is straight.
82758380 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to 82758380. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| Cross-Reference | GS-V-079-2 |
Frequently asked questions
Is 82758380 the driver's side or passenger side?
It is the left-hand piece, which is the driver's side on a North American cab. The specification lists Side: L. The right-hand center molding is a separate part number and will not fit the left side because the contour is mirrored.
Will this fit my 2021 VNL without modification?
It is listed for Volvo VNL 2018-2024 and the mounting points are molded to line up with the factory holes. That said, we do not promise fitment from a number alone. Verify with your VIN or match the number on the molding you are removing before ordering.
What is GS-V-079-2 and why is it listed with 82758380?
GS-V-079-2 is the aftermarket cross-reference number for the same left-hand center bumper trim molding. It is listed for identification so you can find the part regardless of which catalog number you started with. Both numbers point to the same physical piece.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.