What FD009 Actually Is
FD009 is a complete kit: one straight steel hanger arm plus the flap. The arm is heavy-gauge formed steel with a spring-loaded pivot, so when the flap catches a curb, a dock edge, or a snowbank, the pivot gives and returns instead of the arm folding over. That spring is the difference between a hanger you straighten every winter and one you leave alone.
Span is 30 inches with a 7-inch mounting height. That covers the standard left, rear, and right placements on tractors and trailers using the common bolt spacing. Finish is powder coat or zinc plating over black steel, which is what keeps it alive through salt and brine season on northern lanes.
Mounting is direct bolt-on to existing frame holes. No welding, no drilling, no fabrication, and it comes back off if you need to change configurations later. Specifications listed for this part are steel construction, mud flap type — anything beyond that, confirm against the hardware on your truck.
Why 02224LLR Crosses Here
02224LLR is the cross-reference number that shows up on the same application. It crosses to FD009 because the three things that matter on a mud flap hanger are identical: arm length, mounting height, and bolt pattern. Same form, same fitment, same function. The flap hangs in the same plane at the same distance behind the tire.
Mud flap hangers are one of the easier crosses to verify in the parts room because there's no electrical, no hydraulic, no calibration. If the 30-inch span matches, the 7-inch mounting face matches, and the frame holes line up, the part does the job. Pivot style is the only other variable worth eyeballing.
That said, cross-reference is a starting point, not a fitment promise. Trucks get rebuilt, brackets get swapped, and previous repairs change spacing. Measure the old hanger arm and the bolt centers, or confirm by VIN, before you commit to the order. We list 02224LLR for identification only — PartStop is not affiliated with or authorized by any OEM.
Check This Before Ordering
Pull a tape on the old hanger. You want overall arm length and the height of the mounting face where it bolts to the frame or the bracket. If your existing unit is bent — and bent hangers are the usual reason for the order — measure a good one on the opposite side instead. A tweaked arm reads short.
Then look at what failed. If the arm is cracked at the weld or the pivot spring is dead and the flap sits crooked, replace the hanger. If only the flap is torn or chewed at the bottom edge, you may not need the whole kit. FD009 ships as hanger plus flap, so it covers both conditions.
FD009 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to FD009. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| Cross-Reference | 02224LLR |
Frequently asked questions
Does FD009 come with the flap or just the hanger?
Both. FD009 is a kit — the straight steel hanger arm and the mud flap together. If you only need one or the other, check what actually failed before ordering the complete kit.
Will this fit if my truck currently runs 02224LLR?
That's the cross, and it's the right place to start. Confirm it by measuring the 30-inch span and the 7-inch mounting height on your existing hanger, and check that the frame bolt holes line up. Fit is confirmed by VIN or by the number stamped on the old part, not by the cross-reference alone.
Do I need to weld or drill to install this?
No. It bolts to the factory frame holes using standard spacing, so no welding and no fabrication. The install is fully reversible if you change flap setups later. Have a wire wheel handy — corroded frame holes are the usual holdup on a mud flap job.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.