What You're Actually Buying
This is a hanger pair, not the flap itself. Two brackets, 430 stainless so they don't rust streak down your flap or seize up on you in a Tacoma winter. Made for a 30" flap, 1-1/8" bolt spacing on the mounting holes - that spacing is the number that matters most here, more than brand or trailer make.
These show up on straight trucks, trailers, and tandem axle setups where the shop just wants a hanger that bolts up and holds a flap flat without bowing out or twisting under wind load at highway speed. Stainless means it'll outlast the mild steel stuff that pits and rusts through in a season or two of road salt and slush.
If your old hangers are bent, cracked at the weld, or rusted through at the bolt holes, that's your sign. Check the actual bolt spacing on what's coming off the truck before you order - don't guess off memory.
How the Cross Numbers Line Up
PS-BD.01.UN.006 crosses to 006-430 and Pino Metal Products PN-3-C-007-430. These aren't OEM truck-maker part numbers - they're aftermarket hanger numbers that all describe the same physical spec: 30" length, 430 stainless, 1-1/8" hole spacing. Different suppliers, same basic bracket.
Where guys get burned is bolt spacing. There's 1-1/8", there's other spacings out there for different flap widths and hanger styles, and they are NOT interchangeable even though the hangers look almost identical hanging on a wall. Measure center-to-center on the mounting holes before you order, not after it shows up and doesn't line up with your existing flap.
Also confirm flap length - 30" hangers are built for a 30" flap. Put a 24" or 36" flap up on the wrong hanger and it either won't reach the ground right or it'll be dragging. Match the numbers to what's stamped or what you measure off the old part, don't match it to what the truck brand is.
Ordering From PartStop
We're in Tacoma - if you're local and need these before end of day, call ahead and we'll have the pair pulled and ready at the counter. Fleet guys running a route don't have time to wait on shipping when a flap's dragging.
Ship nationwide too, and these move fast enough we usually have stock on hand rather than backordering from a distributor three states away.
Every pair carries our 6+ month warranty. Stainless doesn't fail often, but if you get a bad weld or a bent bracket out of the box, we make it right - no argument, no runaround.
PS-BD.01.UN.006 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to PS-BD.01.UN.006. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| Cross-Reference | 006-430 |
| Pino Metal Products | PN-3-C-007-430 |
Frequently asked questions
Does PS-BD.01.UN.006 fit my Freightliner trailer?
Depends on your bolt spacing, not the trailer brand. This hanger is built to 1-1/8" spacing for a 30" flap. Pull the old hanger or measure the holes on your mudflap bracket - if it matches 1-1/8" center to center, you're good. If you're not sure, snap a photo and send it over before ordering.
Is this the same as the Pino Metal Products PN-3-C-007-430?
Same spec - 30" length, 430 stainless, 1-1/8" bolt spacing. They cross because they're built to the same physical dimensions, not because one company makes the other's part. Functionally they do the same job on the truck. Confirm against your old hanger's measurements either way before you order.
Can I mix this hanger with a mud flap I bought somewhere else?
Yes, as long as the flap is sized for a 30" hanger and the flap's mounting holes match this 1-1/8" spacing. Hangers and flaps aren't married to one brand, they just have to match up on dimensions. If the flap you've got is a different hole pattern you'll be drilling new holes, which nobody wants to do on the side of the road.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.