What This Cable Actually Does
This isn't the sensor itself - it's the extension harness that runs from the ABS wheel speed sensor back to the main chassis harness connector. On a lot of Peterbilt builds that connection point sits up in the frame rail area, and that stretch of cable takes a beating from vibration, heat off the brake drums, and just plain age.
When guys bring in a truck with an intermittent ABS fault code, half the time it's not the sensor at all - it's this cable with a cracked connector shell or corrosion wicking up into the pins. Cheaper to replace this than to condemn a good sensor.
Fits Peterbilt trucks 2000 through current production, but 'Peterbilt' covers a lot of chassis configurations over 25 years, so don't just order off the model year alone.
Why All These Numbers Cross
S4497130180 and WN4497130180 are the same part - S and WN prefixes are how different catalogs and Peterbilt's own parts system have listed this cable over the years, sometimes depending on whether it's ordered through service or as a stocked replacement.
The Wabco S449-713-018-0 is worth noting because Wabco built a lot of the ABS systems Peterbilt speced, so that number shows up in a lot of older parts books. Meritor's S8945900672, Dayton Parts GEN2-0180, Automann 577.A7130180 and the others are aftermarket manufacturers building to the same connector pattern, pin count, and cable length as the original.
Where this can bite you: connector style and cable length aren't always identical between years and axle positions on Peterbilt trucks - some builds use a different pin lock or a few inches more slack. Pull the number off your old cable or check your VIN before you order, because 'fits Peterbilt' doesn't mean it fits every Peterbilt.
Ordering From PartStop
We're in Tacoma and keep this one in stock because ABS cable failures are common enough that we'd rather have it on the shelf than make a fleet wait. Local pickup same day if you call ahead, and we ship nationwide if you're not in the yard.
At $26.99 this is cheap insurance against chasing a phantom ABS fault for three days. Comes with our standard 6+ month warranty - if the cable's bad out of the box or fails early, bring it back.
If you're not sure whether your truck uses this exact cable, snap a photo of the number stamped or printed on the old connector and send it to us before you order. Saves everybody a return shipment.
4497130180 Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to 4497130180. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| Wabco | S449-713-018-0 |
| Meritor | S8945900672 |
| Dayton Parts | GEN2-0180 |
| Network Trailer Parts | ABE0014 |
| World American | WA13130180 |
| Automann | 577.A7130180 |
Frequently asked questions
Does 4497130180 fit my 2015 Peterbilt 579?
Likely, but confirm before you buy. The 579 ran this cable in a lot of configurations, but connector style can vary by axle position and build date. Check the number on your existing cable or give us the VIN and we'll verify.
Is this the same as the Wabco S449-713-018-0?
It cross-references to the Wabco number - same connector pattern and pin-out - but this listing is the aftermarket version, not a Wabco-branded part. Functionally it's built to the same spec, but it's not sold as Wabco.
My ABS light is on - is it definitely this cable or the sensor?
Can't tell you without a scan tool pulling the actual fault code. If it's an intermittent code, especially one that clears when you wiggle the harness near the frame rail, cable's a good bet. If it's a hard code that stays on, get the sensor itself checked too before you buy parts.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.