What You're Getting
This is a 434mm ventilated rotor, drilled for either 10 or 12 hole hub patterns depending on which axle setup your FH or FM came with. It's not a one-size-fits-all deal — Volvo ran a few different hub configurations across model years, so the hole count and offset matter more than most guys think when they're ordering off a part number alone.
CV60058K shows up most often on Volvo FH and FM trucks with air disc brakes, which by now is most of the fleet from the mid-2000s forward. If your truck still has drum brakes up front, this isn't your part — this is strictly for the disc setup.
Why These Numbers Cross
3092710 is Volvo's factory number for this same rotor casting, and 21526754 shows up as a superseded or revised part number depending on production run — Volvo does this periodically when they tweak a casting spec slightly without changing form/fit/function enough to warrant a whole new design. Bosch 123456 and Delphi 654321 are aftermarket numbers that cross to the same rotor spec, same bolt pattern, same disc thickness.
Where guys get burned is assuming every 434mm rotor is interchangeable across all Volvo models — it's not. The hub offset and hole pattern (10 vs 12) have to match your hub, not just the diameter. If you're not 100% sure which pattern your truck has, count the holes on the rotor you're pulling off before you order.
How to Confirm Before You Order
Surest way to nail this down is pull the number off the old rotor — it'll usually be cast or stamped somewhere on the hat section. Match that against what's listed here, or give us your VIN and we'll run it against Volvo's build spec to confirm hole count and rotor thickness for your exact truck.
We keep CV60058K in stock here in Tacoma for same-day pickup or local delivery, and we ship nationwide if you're not local. Comes with our standard 6+ month warranty. If it's wrong for your application, we'll sort out the return or exchange — just don't toss the old rotor until the new one's on the truck and you've confirmed it seats right.
CV60058K Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to CV60058K. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| BOSCH | 123456 |
| DELPHI | 654321 |
| Volvo | 3092710, 21526754 |
Frequently asked questions
Does CV60058K fit my 2015 Volvo FH?
Likely, but confirm by checking the hole count on your current rotor first — FH trucks came with both 10 and 12 hole hub patterns depending on axle config and production year. Give us the VIN and we'll verify against Volvo's spec before you order.
Is this the same as the Bosch 123456 rotor?
Bosch 123456 crosses to the same 434mm spec and bolt pattern as CV60058K, so it's a direct replacement for the same application. Casting brand and finish will differ slightly, but the fitment spec is the same.
Why are there two Volvo numbers — 3092710 and 21526754 — for one rotor?
Volvo revises part numbers sometimes when there's a minor spec change on the casting that doesn't affect fit. Both numbers should reference the same physical rotor for your application, but if you've got the old number off your truck, that's the one to match first.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.