What You're Getting and What It Fits
This is the driver side headlight assembly - chrome shell, projector-style LED lens, integrated halo ring for daytime running light, and high/low beam function in one unit. It's LH only, so if you need both sides you're ordering the passenger unit separately, part number F01159-R if we've got it listed.
Peterbilt built the 388/389 series on basically the same front-end sheet metal, and the 367/567 share a lot of that cab and hood architecture too, which is why one headlight assembly covers all four models. That said, Peterbilt made running changes over the years - different mounting tabs, different connector plugs on some model years - so this isn't a blanket 'every 388 ever built' fit.
Surest way to know for sure: pull your old headlight and check the Peterbilt part number stamped or on a sticker on the housing, or just run your VIN. Don't guess off the model name alone.
How the Cross Numbers Line Up
The Peterbilt factory numbers - P54-6101-110, 96001-5, P54-1062-100 - all point to the same driver side headlight location and function across the model years Peterbilt used this housing style. Aftermarket houses like 564.46011L and 88118 are built to bolt into that same opening with the same mounting points and connector layout.
Where guys get burned on headlight cross-references is the connector pigtail and the halo DRL wiring - some model years wired the DRL circuit differently, and if your truck's harness doesn't match, the halo won't function even though the headlight bolts in fine. Mounting tabs and lens shape can also vary slightly between early and late production runs.
If your old part number matches anything in the table, or your VIN comes back clean for one of these models, you're in good shape. When in doubt, snap a photo of the old unit's tag and call us before you order - cheaper than shipping it back.
Ordering From PartStop
We're out of Tacoma, so if you're running local we can usually get this to you same-day or next-day. Ship nationwide too, and most of the country sees it in 2-4 business days depending on where the truck's parked.
Comes with a 6+ month warranty, standard for us on lighting parts. This is an aftermarket unit - not a Peterbilt Factory part - built to interchange with the factory numbers, so treat it as a direct replacement candidate, not a guaranteed drop-in until you've confirmed fitment.
Counter guys are here during business hours if you want to talk through your VIN or the old part's tag number before you commit. Cheaper to spend five minutes on the phone than to eat a restocking fee on a headlight that didn't quite match your harness.
F01159-L Cross-Reference & Interchange Numbers
These manufacturer and aftermarket numbers commonly cross-reference to F01159-L. Use them to identify the part — then confirm the exact fit by VIN or the number stamped on your old unit before you order. An interchange is a starting point, not a fitment guarantee.
| Brand / Line | Cross-Reference Numbers |
|---|---|
| Peterbilt | P54-6101-110, 96001-5, P54-1062-100 |
| Aftermarket | 564.46011L, 88118 |
Frequently asked questions
Does F01159-L fit my 2015 Peterbilt 389?
Likely yes, but confirm by checking the number on your old headlight housing or running your VIN. Peterbilt made changes across model years even within the 389 line, so don't order off the model name alone - match the number or VIN first.
Is this the same as the Peterbilt 96001-5 headlight?
It cross-references to the same driver side location and function as 96001-5, meaning it's built to mount and wire the same way. It's an aftermarket part though, not a Peterbilt Factory unit, so confirm your old part's number matches before ordering.
Will the halo DRL work on my truck without extra wiring?
Should plug into the same connector Peterbilt used for that DRL circuit on most 388/389/367/567 trucks, but some model years wired it differently. If your old headlight had a working halo DRL, this should carry over - if you're not sure, check your harness connector against the old unit before installing.
Not sure it fits? We check before you pay.
Run your VIN and we’ll match parts to your exact truck, or call the counter — a person who knows trucks verifies fitment by OEM number before the order ships. No wrong-box returns.
More cross-reference guides
Need the part, not just the reading?
Every part below is a Premium Quality aftermarket Direct Replacement with published OEM cross-reference numbers, a 6+ month warranty and same-business-day shipping from Tacoma, WA. Not sure it fits? Run your VIN — or call and a person who knows trucks will verify fitment before you pay.